Preventive Maintenance Analysis Using Reliability Centered Maintenance II
Analisis Preventive Maintanance Menggunakan Reliability Centered Maintanance II
DOI:
https://doi.org/10.21070/ups.10646Keywords:
Reliability Centered Maintenance II, FMEA, MTTF, MTTR ;Abstract
This study aims to identify critical components in the hoist machine, determine the Risk Priority Number value, and formulate recommendations for appropriate maintenance strategies. This study uses the Reliability Centered Maintenance II approach to analyze the level of reliability of machine components and determine the appropriate maintenance strategy. The results of the analysis show that the shaft component in the trolley system is the most critical component with an RPN value of 270. In addition, an MTTF value of 390,420 hours and an MTTR of 3,00469 hours with an availability value of 99.24%, which shows a very high level of machine operation readiness. The recommended maintenance strategy is Condition-Based Maintenance through vibration, temperature, and inspection of the physical condition of components.
Downloads
References
A. R. Hidayat, “Analisa Waktu Optimasi Perawatan Mesin CNC Milling dengan Pendekatan Value Stream Mapping Serta Perbaikan dengan Failur Mode and Effect Analysis pada Mesin CNC Milling,” J. Rekayasa Mesin, vol. 18, no. 3, hal. 345, 2023, doi: 10.32497/jrm.v18i3.4099.
M. Asbari dan N. Mintari, “Analisis Perencanaan Kebutuhan Sparepart dalam Mendukung Sistem Managemen Operasi Mesin Produksi: Systematic Literature Review,” J. Ilmu Sos. Manajemen, Akunt. dan Bisnis, vol. 1, no. 2, hal. 66–73, 2024, [Daring]. Tersedia pada: https://ejournal.ayasophia.org/index.php/jismab/article/view/136
N. Rahmawati dan M. H. Hakim, “Analisis Bahaya dan Upaya Pencegahan Keadaan Nearmiss Pesawat Angkat-Angkut Hoist pada Area Warehouse di PT. XYZ,” J. Manuf. Ind. Eng. Technol., vol. 1, no. 2, hal. 10–19, 2022, doi: 10.30651/mine-tech.v1i2.16789.
R. Hermawan, D. Supriyatna, dan E. Susilo, “The Importance of Preventive Maintenance on Cnc Laser Cutting Machines: Maintaining Quality Consistency and Avoiding Unexpected Damage,” Futur. Educ. J., vol. 4, no. 4, hal. Page, 2025, [Daring]. Tersedia pada: https://journal.tofedu.or.id/index.php/journal/index
I. I. Siagian, P. J. Ginting, dan A. C. Sembiring, “Analisis Perawatan Mesin Kritis Dengan Metode Reliability Centered Maintenance (RCM) Pada Pabrik Kelapa Sawit,” J. Ilm. Tek. Ind. Prima (JURITI PRIMA), vol. 7, no. 2, 2024, doi: 10.34012/juritiprima.v7i2.5554.
N. F. Qurratuláini, M. Darul, dan H. Natsir, “Penilaian Risiko Kegagalan Gantry Crane Menggunakan Failure Mode Effect and Analysis (FMEA) dan Fishbone Diagram,” J. Safety, Heal. Environ. Eng., vol. 3, no. 1, hal. 33–40, 2025, doi: 10.35991/jshee.v3i1.56.
Mickhael Apriliano Lie, “Analisis Efektivitas Mesin Produksi Menggunakan Metode OEE pada Industri Makanan: Studi Kasus di PT ‘Y,’” J. Mech. Eng., vol. 2, no. 1, hal. 1–9, 2025, doi: 10.47134/jme.v2i1.3966.
W. Nugroho dan T. Sukmono, “Implementation of Reliability Centered Maintenance (Rcm) Ii in Packaging Industry Production Machinery Maintenance Activities,” J. Technol. Sci., vol. 1, no. 1, hal. 51–68, 2024, doi: 10.61796/ipteks.v1i1.91.
R. O. M. Andri Herlambanga, Syahputra Amrib, Nita Marikenac, “Sosialisasi Penjadwalan Perawatan Mesin Produksi Dengan Metode Reliability Centered Maitenance ( RCM ),” hal. 66–75, 2025.
B. Sumantri, A. Y. Ismail, dan S. Syamsuri, “Analisis Mitigasi Risiko Kegagalan Operasional Peralatan Melalui Pendekatan RCM Dan MVSM Dengan Perspektif FMECA,” Nusant. Eng., vol. 8, no. 01, hal. 65–74, 2025, doi: 10.29407/noe.v8i01.24385.
2 Akbar Ramadhandi Sambada1), Tedjo Sukmono*, “Analysis Operational Reliability Of Concrete Pump Using FMEA And FTA Methods [ Analisa Reliabilitas Operasional Concrete Pump Menggunakan,” hal. 1–11, 2024.
J. H. Saputra, H. Bashori, K. Kunci, : Perawatan, dan R. Ii, “Analisa Perawatan Mesin Protos 1-8 Menggunakan Metode Reliability Centered Maintenance Ii (Rcm Ii) Di Pt. Xyz,” J. Mech. Manuf. Technol., vol. 5, no. 2, hal. 48–60, 2024.
Muhammad Ihsan Aprilianto, Ikhsan Romli, dan Hendi Herlambang, “Perencanaan Pemeliharaan Mesin Injection Menggunakan Metode Reliability Centered Maintenance (RCM) pada Produksi Komponen Karet Otomotif,” J. Teknol. dan Manaj. Ind. Terap., vol. 4, no. 3, hal. 875–881, 2025, doi: 10.55826/jtmit.v4i3.1063.
R. M. Simanungkalit, S. Suliawati, dan T. Hernawati, “Analisis Penerapan Sistem Perawatan dengan Menggunakan Metode Reliability Centered Maintenance (RCM) pada Cement Mill Type Tube Mill di PT Cemindo Gemilang Medan,” Blend Sains J. Tek., vol. 2, no. 1, hal. 72–83, 2023, doi: 10.56211/blendsains.v2i1.199.
I. Faris Rudiana, L. Yulia, dan E. Nursolih, “ANALISIS PEMELIHARAAN MESIN PRODUKSI DENGAN METODE RCM (Reliability Centered Maintenance) PADA PT. SURYA AGROLIKA REKSA,” J. Ind. Galuh, vol. 6, no. 2, hal. 65–74, 2024.
A. C. Amin, I. Apriliana, dan S. Wulandari, “Optimization of City Transport Maintenance and Reliability Centered Maintenance ( RCM ) Methods Optimasi Perawatan Angkutan Kota dengan menggunakan metode Reliability Centered Maintenance ( RCM ),” hal. 1–9.
M.-H. Charles E. Ebeling, An Introduction to Reliability and Maintainability Engineering. 1997.
E. A. Octavia dan R. Rusindiyanto, “Preventive Maintenance Planning Using Age Replacement Method for Head Router Machines,” Acad. Open, vol. 10, no. 2, hal. 1–12, 2025, doi: 10.21070/acopen.10.2025.12012.
I. Ramadhan dan W. Widiasih, “Analisis Penggantian dan Perawatan pada Papermachine Bagian Wire dan Dryer Menggunakan Metode Reliability Centered Maintenance dan Age replacement Pada PT. X,” J. Tekst. J. Keilmuan dan Apl. Bid. Tekst. dan Manaj. Ind., vol. 6, no. 1, hal. 1–14, 2023, doi: 10.59432/jute.v6i1.60.
R. K. Ilmi, Y. Sukrawan, T. Permana, J. Setiabudhi, dan N. Bandung, “CONDITION BASED MONITORING IMPROVES COMPONENT DURABILITY IN HEAVY EQUIPMENT MAINTENANCE,” vol. 2, no. 1, 2024.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
