Modification of Gas Stove Oven into Appliance Shoe Dryer
Modifikasi Oven Kompor Gas Menjadi Alat Pengering Sepatu
DOI:
https://doi.org/10.21070/ups.10320Keywords:
Shoe dryer, Arduino Uno R3, Gas Oven, Sensor DHT11, Hc06 bluetoothAbstract
Shoe drying is generally still dependent on sunlight and fans, which often cause problems during the rainy season as the process becomes slow and may damage the shoe color. This study aims to design and develop a shoe dryer by modifying a gas stove oven controlled with an Arduino Uno R3. The system is equipped with a DHT11 temperature and humidity sensor, a UV lamp for sterilization, a 5V relay module for power control, and an HC-06 Bluetooth module that allows smartphone-based operation with automatic timer settings (30, 60, and 120 minutes).
Downloads
References
Rekayasa dan Teknol. Elektro, vol. 17, no. 3, pp. 292–297, 2023, doi: 10.23960/elc.v17n3.2544.
Y. Murdianingsih and L. Aprianti, “Sistem Monitoring Pengering Sepatu Berbasis Internet of Things Pada Platform Node-Red,” J. Teknol. dan Komun. STMIK Subang, vol. 14, no. 1, pp. 33–39, 2021, doi: 10.47561/a.v14i1.204.
R. Maulanasari and E. Prihastono, “Proceeding SENDIU 2021 DESAIN MESIN PENGERING SEPATU SEMI OTOMATIS BERDASARKAN PRINSIP ERGONOMI ( STUDI KASUS PADA UMKM CLEANVAST CUCI SEPATU SEMARANG ),” pp. 978–979, 2021.
Subandi, Suparman, and Sukiyadi, “Modifikasi Oven Bekas sebagai Alat Pengering,” J. Ilm. Tek. Pertan., vol. 7, no. 2, pp. 77–144, 2015.
A. Z. Nasikh, “Inovasi Dalam Pengembangan Drybox Untuk Pengering Sepatu,” Al Jazari J. Ilm. Tek. Mesin, vol. 8, no. 2, pp. 69–73, 2023, doi: 10.31602/al-jazari.v8i2.12367.
R. B. Jakaria, H. Purnomo, and Iswanto, “Designing Products Sports Shoes Using the Quality Function Deployment (QFD) Method,” R.E.M. (Rekayasa Energi Manufaktur) J., vol. 6, no. 2, pp. 15–22, 2021, doi: 10.21070/r.e.m.v6i2.877.
S. Lomrah, “Pengaruh Cahaya Ultraviolet C (Uv-C) Dan Kelembaban Udara (Rh) Terhadap Jumlah Bakteri Escherichia Coli Pada Kulit Sepatu,” Fak. Sains Dan Teknol. Univ. Islam Negeri Maulana Malik Ibrahim Malang, pp. 1–89, 2017.
A. B. Rizkianto, “Rancang Bangun Pengering Sepatu Berdasarkan Kelembaban Menggunakan Metode Pid (Proportional Integral Derivative),” Fak. Teknol. Dan Inform. Inst. Bisnis Dan Inform. Stikom Jawa Timur, pp. 1–71, 2019.
B. Sulaeman, T. Informatika, and S. Selatan, “OTOMATIS MENGGUNAKAN SENSOR KELEMBABAN,” vol. 12, no. 3, 2024.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
