A Design Development of a Briquette Feeding System Using the DFMA Method
Pengembangan Desain Feeding Briket Dengan Metode DFMA
DOI:
https://doi.org/10.21070/ups.10128Keywords:
briket, Mesin Feeding, EfiseinsiAbstract
Briquettes can be used as an alternative energy source because they can be produced from industrial waste materials. Therefore, a briquette feeding machine design was developed. In general, a feeding machine is an automated device used to regulate, distribute, and supply materials to the next processing stage in the production line. In this study, only a specific part of the feeding system, namely the guide section, was analyzed using the DFMA method. DFMA is a combination of the DFM and DFA methods. Based on the results of this combined method, it was concluded that Concept Design 2 is the most efficient design when analyzed using the DFMA method.
Downloads
References
N. Iskandar, “UJI KUALITAS PRODUK BRIKET ARANG TEMPURUNG KELAPA BERDASARKAN STANDAR MUTU SNI,” J. Chem. Inf. Model., vol. 53, no. 9, pp. 1689–1699, 2019.
H. D. Anggraini, “Analisis Dampak Industri 4.0 terhadap Produktivitas dan Efisiensi Produksi,” Circ. Arch., pp. 2–12, 2023, [Online]. Available: http://circle-archive.com/index.php/carc/article/view/50
M. Razi, T. Turmizi, S. Syukran, and Z. Zulkifli, “Desain dan Pengembangan Mesin Press Biobriket Menggunakan Elektro-Pneumatik Sistem berbasis PLC,” … Mek. Inov. dan …, vol. 10, no. 1, 2024, [Online]. Available: http://jurnal.utu.ac.id/jmekanova/article/view/9346%0Ahttp://jurnal.utu.ac.id/jmekanova/article/download/9346/pdf
A. Sitepu and Brilioneristen, “Penerapan Design for Manufacturing and Assembly ( DFMA ) pada Jam TALENTA Conference Series Penerapan Design for Manufacturing and Assembly ( DFMA ) pada Jam Dinding,” vol. 6, no. 1, 2023, doi: 10.32734/ee.v6i1.1803.
W. A. K. Geoffrey Boothroyd, Peter Dewhurst, Product design for manufacture and assembly third edition, vol. 7, no. 2. 2020.
N. Tawaf, “Perancangan Mesin Pemipil Jagung untuk Industri Rumah Tangga,” Indones. J. Appl. Sci. Technol., vol. 1, no. 1, pp. 47–54, 2020, [Online]. Available: https://www.journal.publication-center.com/index.php/ijast/article/view/48
A. E. Intani, “DESIGN FOR MANUFACTURING ( DFM ) UNTUK MEMINIMASI BIAYA PRODUKSI DAN KUALITAS ( STUDI KASUS PALLET BOX FABRICATION SECTION PT SAPTAINDRA SEJATI ),” vol. 9, no. 2, pp. 124–139, 2017.
M. Syaiful, A. Eka, A. A. Arifin, and D. Arifianto, “Evaluasi Rancangan Mesin Lathe Mini Dengan Metode Design For Manufacture and Assembly ( DFMA ),” pp. 1–9, 2022.
M. I. H and W. Budiawan, “ANALISIS MODULARITAS MENGGUNAKAN METODE DFM PADA GENERATOR DESINFEKTAN PT . PG KREBET BARU,” pp. 1–12.
E. Prasetyo, R. Hermawan, M. N. I. Ridho, I. I. Hajar, H. Hariri, and E. A. Pane, “Analisis Kekuatan Rangka Pada Mesin Transverse Ducting Flange (TDF) Menggunakan Software Solidworks,” Rekayasa, vol. 13, no. 3, pp. 299–306, 2020, doi: 10.21107/rekayasa.v13i3.8872.
R. Ilyandi et al., “Analisis Design for Assembly (Dfa) Pada Prototipe Mesin Pemisah Sampah Material Ferromagnetik Dan Non Ferromagnetik,” Jom FTEKNIK, vol. 2, no. 1, pp. 262–288, 2008.
I. Hafizh, “Re-Desain Produk Wellhead untuk Menurunkan Cost dan Waktu Instalasi dengan Metode DFMA,” J. Tek. Mesin Unsyiah, vol. 9, no. Juni, pp. 20–24, 2021, [Online]. Available: http://www.jurnal.unsyiah.ac.id/JTM/article/view/19450
W. Ru, R. Ginting, O. Sebastian, and V. Frans, “Aplikasi Snap Fit Joint Untuk Peningkatan Efisiensi Desain Produk MCVP dengan Menggunakan Metode DFMA,” Talent. Conf. Ser. Energy Eng. Apl. Sn. Fit Jt. Untuk Peningkatan Efisiensi Desain Prod. MCVP dengan Menggunakan Metod. DFMA, vol. 8, no. 1, pp. 1–10, 2025, doi: 10.32734/ee.v8i1.2647.
Mulyadi, “Evaluasi Perancangan dan Pembuatan Multypurpose Wheelchair dengan Metode DFM”.
E. Appleton, Product Design for Manufacture and Assembly, vol. 28, no. 3. 2008. doi: 10.1108/aa.2008.03328cae.001.
I. Iswanto, R. Bamban Jakaria, B. Isma Putra, and M. Ibrahim, “Washbasin Design with DFMA Approach for Covid-19 Prevention,” R.E.M. (Rekayasa Energi Manufaktur) J., vol. 7, no. 1, pp. 15–18, 2022, doi: 10.21070/r.e.m.v7i1.1642.
H. A. Putra and R. B. Jakaria, “Analisa Design For Assembly (DFA) Pada Perancangan Produk Knalpot,” Procedia Eng. Life Sci., vol. 1, no. 2, pp. 1–8, 2021.
Downloads
Additional Files
Posted
License
Copyright (c) 2026 UMSIDA Preprints Server
This work is licensed under a Creative Commons Attribution 4.0 International License.
